The ABINIT Users Mailing List ( CLOSED )

[Ravinder Abrol <rabrol@us.ibm.com>]

Hi Nichols,
Check out the last email sent by me
on this subject.
It is in a different thread. May be
it will help you.
What error are you getting exactly?
Ravi

-----
Ravinder  Abrol,  Ph. D.
25-143, Department of Physical Sciences
IBM Thomas J. Watson Research Center
Yorktown Heights, NY 10598
Phone: 914-945-1617
Email: rabrol@us.ibm.com

"Nichols A. Romero" <nromero@uiuc.edu>

04/19/2004 04:37 PM

To	Ravinder Abrol/Watson/IBM@IBMUS
cc
Subject	Re: [abinit-forum] Compilation problem : Abinit_4.2.4 (parallel        use)

I still seem to be getting a similar problem. What
version of the
compiler do you have? Though I'm using Abinit 4.1.4 so maybe I should
just upgrade and the problem might go away.

Bests,
On Fri, 2004-04-16 at 14:59, Ravinder Abrol wrote:
> Hi,
> You can also add some of your compiler flags like bmaxdata and -qhot
> to the FFLAGS and FFLAGS_LIBS lines in the makefile_macros file I
> provided
> in my first email.
> Ravi
> 
> -----
> Ravinder  Abrol,  Ph. D.
> 25-143, Department of Physical Sciences
> IBM Thomas J. Watson Research Center
> Yorktown Heights, NY 10598
> Phone: 914-945-1617
> Email: rabrol@us.ibm.com
> 
> 
> 
> Ravinder Abrol/Watson/IBM@IBMUS
> 
> 04/16/2004 03:29 PM
>          Please respond to
>                forum
>                To
> forum@abinit.org
>                cc
> 
>           Subject
> Re:
> [abinit-forum]
> Compilation
> problem :
> Abinit_4.2.4
> (parallel use)
> 
> 
> 
> 
> 
> Hi,
> First of all you should be using the parallel makefile_macro, which
> will
> call the mpxlf90 and mpcc parallel compilers instead of the serial
> ones
> (xlf90 and cc). Second, I encountered the same error you got just
a
> couple of
> weeks ago. I had to make a small change in the parallel makefile_macro
> provided with abinit. I have provided my fixed parallel
> makefile_macros file below
> for IBM SP2 systems. 
> 
> You can copy it and link your makefile_macros file to it like it is
> done for the serial
> version compilation. Then try to make abinip.
> 
> Makefiles can be highly system dependent, so let me know if it doesn't
> work
> for your system. Best of luck!
> Ravi
> 
> 
> ###################### Parallel makefile_macros for IBM SP2
> #############
> # This file contains the definitions needed for every possible script
> # to be used with the ABINIT makefiles.  It is very much
> machine-dependent.
> # It is read by makemake and makearch.
> 
> # This version for a SP2 machine, parallel version
> 
> # Explanations about this file can be found in the
> makefile_macros_help file,
> # in the Infos subdirectory
> ####################################################################
> # Note that the compiler are those for the parallel code.
> 
> # Machine type
> MACHINE=ibm
> # Fortran optimized compilation
> FC=mpxlf90_r
> FFLAGS=-O3 -qnolm -qarch=auto -qstrict -q64
> MAIN_ROUTINE_FFLAGS=-qcharlen=16000
> FFLAGS_LIBS=-O3 -qnolm -qarch=auto -qstrict -qfixed -q64
> FLINK=-bloadmap:loadmap
> # C preprocessor, used to preprocess the fortran source.
> CPP=/usr/lib/cpp
> CPP_FLAGS=-P -q64
> # C optimized compilation.
> CC=mpcc_r
> CFLAGS=-O
> # Location of perl . Used to generate the script fldiff, in
> ~ABINIT/Utilities .
> PERL=/usr/local/gnu/bin/perl
> # Definition of libraries
> BLAS=
> LIBS= $(LAPACK) -lblas
> 
> ####################################################################
> # For the parallel version
> 
> # Location of the MPI library
> # Location of directory with header files *.h for parallel version
> # _BASE=/usr/local/mpich
> _BASE=/usr/lpp/ppe.poe
> FFLAGS_PAR=$(FFLAGS)
> ####################################################################
> 
> # This is a last line in parallel makefile_macros ----------
> 
> 
> -----
> Ravinder  Abrol,  Ph. D.
> 25-143, Department of Physical Sciences
> IBM Thomas J. Watson Research Center
> Yorktown Heights, NY 10598
> Phone: 914-945-1617
> Email: rabrol@us.ibm.com
> 
> 
> Ms Gargi Dutta
> <gdutta@jncasr.ac.in>
> 
> 04/16/2004 12:57 PM
>          Please respond to
>                forum
> 
>                To
> forum@abinit.org
>                cc
> 
>           Subject
> [abinit-forum]
> Compilation
> problem :
> Abinit_4.2.4
> (parallel use)
> 
> 
> 
> 
> 
> 
> 
> Hi,
>    i am having the following problem while compiling vAbinit_4.2.4
for
> parallel use. I have used  xlf90  compiler with the following
flags :
> -O3 -qarch=pwr3 -qstrict -bmaxdata:0x80000000 -qtune=pwr3 -qhot
> 
> The error is in the program "defs_xderive.par.f" in the
directory
> /Src_8seqpar  in the line
> 
>            integer(MPI_OFFSET_KIND)
 :: offset,posit
> 
>     The following is the error :
> 
> xlf90 -O3 -qarch=pwr3 -qstrict -bmaxdata:0x80000000 -qtune=pwr3 -qhot
> -I
> /usr/lpp/ppe.poe/include -c defs_xderive.par.f
> "defs_xderive.par.f", line 168.12: 1516-050 (S) _expression_
or initial
> value must be evaluated at compile time.
> "defs_xderive.par.f", line 195.12: 1516-050 (S) _expression_
or initial
> value must be evaluated at compile time.
> "defs_xderive.par.f", line 222.12: 1516-050 (S) _expression_
or initial
> value must be evaluated at compile time.
> "defs_xderive.par.f", line 250.12: 1516-050 (S) _expression_
or initial
> value must be evaluated at compile time.
> "defs_xderive.par.f", line 282.12: 1516-050 (S) _expression_
or initial
> value must be evaluated at compile time.
> "defs_xderive.par.f", line 299.12: 1516-050 (S) _expression_
or initial
> value must be evaluated at compile time.
> "defs_xderive.par.f", line 313.12: 1516-050 (S) _expression_
or initial
> value must be evaluated at compile time.
> "defs_xderive.par.f", line 341.12: 1516-050 (S) _expression_
or initial
> value must be evaluated at compile time.
> "defs_xderive.par.f", line 355.12: 1516-050 (S) _expression_
or initial
> value must be evaluated at compile time.
> ** defs_xderive   === End of Compilation 1 ===
> 1501-511  Compilation failed for file defs_xderive.par.f.
> make: 1254-004 The error code from the last command is 1.
> 
> 
> Stop.
> make: 1254-004 The error code from the last command is 2.
> 
> 
> Stop.
> make: 1254-004 The error code from the last command is 2.
> 
> 
> If anyone has come across such an error or can suggest a solution,
> please
> let me know as soon as possible.
> 
> regards,
> Gargi
> 
> 
> 
> 
> 
-- 
Nichols A. Romero

4-133 ESB, MC 704                
          508 East Michigan Avenue
1110 West Green Street              
       Apartment 12
Urbana, IL 61801-3080              
        Urbana, IL 61801-5176
(217) 333-6108                
             (217) 417-5210