The ABINIT Users Mailing List ( CLOSED )

[Anglade Pierre-Matthieu <anglade@gmail.com>]

Hi,

Usually this kind of compiler bug is solved by reducing or removing
the compiler optimisation flags for the problematic file. For instance
in your case you could just try to go to the directory src/68_gw and
issue the same compilation command that fails, reducing progressively
the optimisation flags until success. Afterwards, you'll just have to
continue the build by going back and issuing again your make command.

regards

PMA.

On Wed, Sep 9, 2009 at 3:57 AM, Jian-Zhou ZHAO<jianzhou.zhao@gmail.com> wrote:
> Hi, I tried compile version 5.8.4 with pgf 9.0.3, my config file is
> ./configure --prefix=/home/zhaozz/software --enable-64bit-flags \
>        --enable-netcdf="no" --enable-bigdft="no" --enable-libxc="no"
> --enable-etsf-io="no" \
>        --enable-debug="no" --enable-mpi="yes"
> --with-mpi-prefix=/home/zhao/software/pgi/linux86-64/7.1/mpi/mpich \
>        CC=mpicc FC=mpif90 CXX=mpicxx \
>        FCFLAGS='-O3 -tp barcelona-64 -fastsse -module
> /home/zhaozz/software/abinit-5.8.4/tmp-modules
> -I/home/zhaozz/software/abinit-5.8.4/tmp-modules -Mextend' \
>        --with-linalg-libs='-L/home/zhaozz/software/pgi/linux86-64/9.0-3/lib
> -lacml -lacml_mv'
>
>
> but in directory src/68_gw, I encountered following problem:
>
> mpif90 -DHAVE_CONFIG_H -I. -I../.. -I../../src/61_ionetcdf
> -I../../src/61_ionetcdf -I../../src/32_util -I../../src/32_util
> -I../../src/67_common -I../../src/67_common -I../../src/28_numeric_noabirule
> -I../../src/28_numeric_noabirule -I../../src/51_manage_mpi
> -I../../src/51_manage_mpi -I../../src/65_nonlocal -I../../src/65_nonlocal
> -I../../src/16_hideleave -I../../src/16_hideleave -I../../src/interfaces
> -I../../src/interfaces -I../../src/59_io_mpi -I../../src/59_io_mpi
> -I../../src/62_occeig -I../../src/62_occeig -I../../src/56_recipspace
> -I../../src/56_recipspace -I../../src/56_xc -I../../src/56_xc
> -I../../src/42_geometry -I../../src/42_geometry -I../../src/53_ffts
> -I../../src/53_ffts -I../../src/66_wfs -I../../src/66_wfs
> -I../../src/62_iowfdenpot -I../../src/62_iowfdenpot -I../../src/18_timing
> -I../../src/18_timing -I../../src/12_hide_mpi -I../../src/12_hide_mpi
> -I../../src/10_defs -I../../src/10_defs -I../../src/14_hidewrite
> -I../../src/14_hidewrite -I../../src/66_paw -I../../src/66_paw
> -I../../src/57_iovars -I../../src/57_iovars -I../../src/50_abitypes_defs
> -I../../src/50_abitypes_defs -I../../src/27_toolbox_oop
> -I../../src/27_toolbox_oop     -O3 -tp barcelona-64 -fastsse -module
> /home/zhaozz/software/abinit-5.8.4/tmp-modules
> -I/home/zhaozz/software/abinit-5.8.4/tmp-modules -Mextend -c -o m_bz_mesh.o
> m_bz_mesh.F90
> pgf90-Fatal-/home/zhaozz/software/pgi/linux86-64/9.0-3/bin/pgf902 
> TERMINATED by
> signal 11
> Arguments to /home/zhaozz/software/pgi/linux86-64/9.0-3/bin/pgf902
> /home/zhaozz/software/pgi/linux86-64/9.0-3/bin/pgf902
> /tmp/pgf90GP4gG86blh64.ilm -fn m_bz_mesh.F90 -opt 3 -terse 1 -inform warn 
> -x 51
> 0x20 -x 119 0xa10000 -x 122 0x40 -x 123 0x1000 -x 127 4 -x 127 17 -x 19
> 0x400000 -x 28 0x40000 -x 70 0x8000 -x 122 1 -quad -vect 56 -y 34 16 -x 34 
> 0x8
> -y 19 8 -y 35 0 -x 42 0x30 -x 39 0x40 -x 39 0x80 -x 34 0x400000 -x 149 1 -x 
> 150
> 1 -x 59 4 -x 59 4 -tp gh-64 -x 120 0x1000 -x 124 0x1400 -y 15 2 -x 57 
> 0x3b0000
> -x 58 0x48000000 -x 49 0x100 -x 120 0x200 -astype 0 -x 121 1 -x 124 1 -x 9 
> 1 -x
> 42 0x14200000 -x 72 0x1 -x 136 0x11 -x 80 0x800000 -quad -x 119 0x10000000 
> -x
> 129 0x40000000 -x 129 2 -cmdline '+pgf90 m_bz_mesh.F90 -DHAVE_CONFIG_H -I.
> -I../.. -I../../src/61_ionetcdf -I../../src/61_ionetcdf -I../../src/32_util
> -I../../src/32_util -I../../src/67_common -I../../src/67_common
> -I../../src/28_numeric_noabirule -I../../src/28_numeric_noabirule
> -I../../src/51_manage_mpi -I../../src/51_manage_mpi -I../../src/65_nonlocal
> -I../../src/65_nonlocal -I../../src/16_hideleave -I../../src/16_hideleave
> -I../../src/interfaces -I../../src/interfaces -I../../src/59_io_mpi
> -I../../src/59_io_mpi -I../../src/62_occeig -I../../src/62_occeig
> -I../../src/56_recipspace -I../../src/56_recipspace -I../../src/56_xc
> -I../../src/56_xc -I../../src/42_geometry -I../../src/42_geometry
> -I../../src/53_ffts -I../../src/53_ffts -I../../src/66_wfs 
> -I../../src/66_wfs
> -I../../src/62_iowfdenpot -I../../src/62_iowfdenpot -I../../src/18_timing
> -I../../src/18_timing -I../../src/12_hide_mpi -I../../src/12_hide_mpi
> -I../../src/10_defs -I../../src/10_defs -I../../src/14_hidewrite
> -I../../src/14_hidewrite -I../../src/66_paw -I../../src/66_paw
> -I../../src/57_iovars -I../../src/57_iovars -I../../src/50_abitypes_defs
> -I../../src/50_abitypes_defs -I../../src/27_toolbox_oop
> -I../../src/27_toolbox_oop -O3 -tp barcelona-64 -fastsse -fast -Mvect=sse
> -Mscalarsse -Mcache_align -Mflushz -module
> /home/zhaozz/software/abinit-5.8.4/tmp-modules
> -I/home/zhaozz/software/abinit-5.8.4/tmp-modules -Mextend -c -o m_bz_mesh.o
> -I/home/zhaozz/software/pgi/linux86-64/9.0/mpi/mpich/include/f90base
> -I/home/zhaozz/software/pgi/linux86-64/9.0/mpi/mpich/include' -asm
> /tmp/pgf90GP4gGiBihFCu.sm
> make[3]: *** [m_bz_mesh.o] Error 127
>
> Does anyone know how to solve this problem? Thank you!
>



-- 
Pierre-Matthieu Anglade